Bathroom Renovation in Dublin
Compare up to 4 bathroom renovation professionals in Dublin. Free, no obligation.
Dublin's housing stock is Ireland's most diverse, spanning from Georgian terraces in the city centre (1750s-1830s) through Victorian and Edwardian suburbs (1840s-1910s), inter-war and post-war council housing (1930s-60s), suburban estates (1960s-2000s), Celtic Tiger apartments (1998-2008), and modern high-density developments. Each era presents distinct characteristics for home service providers: Georgian homes have solid brick walls, original timber floors, and sash windows. 1960s-70s suburban semis have cavity block walls, often with minimal insulation, and are the most common candidate for energy retrofits. Celtic Tiger-era apartments may have building defects from the construction boom. The sheer density and variety of Dublin housing means every type of home service has strong, consistent demand.
Dublin has a temperate maritime climate with relatively low rainfall by Irish standards (approximately 750mm annually), though this still exceeds most UK and continental European cities. The east-facing position means less rain than the west coast but more exposure to cold easterly winds in winter, which can affect heating demand and frost risk. Sea proximity moderates temperature extremes. South-facing properties benefit from good solar exposure, making Dublin viable for solar PV installations. Urban heat island effects mean the city centre is typically 1 to 2 degrees warmer than outer suburbs.
Bathroom Renovation in Dublin: Local Insights
Dublin's housing stock is Ireland's most diverse, spanning from Georgian terraces in the city centre (1750s-1830s) through Victorian and Edwardian suburbs (1840s-1910s), inter-war and post-war council housing (1930s-60s), suburban estates (1960s-2000s), Celtic Tiger apartments (1998-2008), and modern high-density developments. Each era presents distinct characteristics for home service providers: Georgian homes have solid brick walls, original timber floors, and sash windows. 1960s-70s suburban semis have cavity block walls, often with minimal insulation, and are the most common candidate for energy retrofits. Celtic Tiger-era apartments may have building defects from the construction boom. The sheer density and variety of Dublin housing means every type of home service has strong, consistent demand.
Dublin has a temperate maritime climate with relatively low rainfall by Irish standards (approximately 750mm annually), though this still exceeds most UK and continental European cities. The east-facing position means less rain than the west coast but more exposure to cold easterly winds in winter, which can affect heating demand and frost risk. Sea proximity moderates temperature extremes. South-facing properties benefit from good solar exposure, making Dublin viable for solar PV installations. Urban heat island effects mean the city centre is typically 1 to 2 degrees warmer than outer suburbs.
Dublin is Ireland's busiest market for all home services due to population density and property values. High demand means competitive pricing for standard trades but premium rates for specialist services. Property values drive significant investment in home improvements, with homeowners willing to spend more on quality materials and finishes. The four Dublin local authorities (City, Dun Laoghaire-Rathdown, Fingal, South Dublin) each have distinct planning approaches. Conservation areas are extensive in Dublin city centre, Dun Laoghaire, and parts of Fingal. Dublin prices for home services are typically 15 to 25% above the national average, reflecting higher labour costs, travel time, and material delivery costs in the urban environment.
Bathroom Renovation Costs in Dublin
Typical costs for bathroom renovation in Dublin (prices may vary (typically 50% above national average)):
| Service | Typical Cost | Notes |
|---|---|---|
| Budget bathroom refit | €6,000 | €12,000 | Size, fixtures |
| Mid-range bathroom | €12,000 | €22,500 | Design, materials |
| Premium bathroom / wet room | €22,500 | €45,000 | Custom design, high-end fixtures |
Bathroom costs split roughly into three components: sanitaryware and fixtures (bath, toilet, basin, shower, taps) at 25-35% of total cost, tiles and flooring at 15-25%, and labour (plumbing, tiling, electrics, plastering, painting) at 40-50%. Moving the toilet or shower location significantly increases plumbing costs because the waste pipes need rerouting. Underfloor heating adds €500 to €1,200 for an average bathroom. Dublin bathroom fitters charge 15-20% above national rates for labour.
Areas We Cover in Dublin
Bathroom Renovation FAQs for Dublin
A basic bathroom refit (new suite, taps, shower, tiles in the existing layout) costs €4,000 to €8,000. A mid-range renovation with better sanitaryware, floor-to-ceiling tiles, and an upgraded shower costs €8,000 to €15,000. Premium renovations with underfloor heating, walk-in shower, freestanding bath, and designer tiles cost €15,000 to €30,000. En-suite bathrooms are usually at the lower end of each range due to smaller size.
A standard bathroom renovation takes 7 to 12 working days (1.5 to 2.5 weeks). Strip-out takes 1 day, plumbing first fix takes 1 to 2 days, tiling takes 2 to 3 days, second fix and finishing take 2 to 3 days, with drying time between some stages. Wet rooms take slightly longer due to additional waterproofing layers. The bathroom is completely unusable during the renovation, so if you only have one bathroom, plan accordingly.
A wet room has no shower tray or enclosure. The entire floor is waterproofed (tanked) with a gentle slope towards a linear or point drain, and the shower area is open or divided by a glass screen. Wet rooms look modern and spacious, are easier to clean, and are excellent for accessibility. They cost €2,000 to €5,000 more than a standard shower installation due to the additional waterproofing, floor preparation, and drainage work. They are particularly popular in en-suites and smaller bathrooms where a shower enclosure feels cramped.
For a family bathroom, having at least one bath in the house is advisable for bathing young children and for resale value. If you have two bathrooms, a bath in the main bathroom and a walk-in shower in the en-suite is the most popular configuration. If you only have one bathroom and rarely use the bath, replacing it with a large walk-in shower creates a more usable and modern space. Estate agents generally advise keeping at least one bath in the house for resale.
Yes. Electric underfloor heating in a bathroom is one of the most cost-effective luxury upgrades you can make. It costs €500 to €1,200 to install (mat system under tiles) and approximately €20 to €40 per year to run for one bathroom. The comfort of warm tiles underfoot on a cold morning is genuinely transformative. It also helps keep the bathroom dry and reduces condensation. The heating mat must be installed before tiling, so it needs to be planned into the project from the start.
Building regulations require mechanical ventilation in bathrooms without an openable window, and it is strongly recommended even if you have a window. A decent extractor fan removes moisture quickly, preventing condensation, mould, and damage to paintwork and grout. A fan with a humidity sensor that activates automatically is the best option. Installation costs €150 to €400 including the fan and electrician's time. It must be installed by a Safe Electric registered electrician.