Demolition in Kildare
Compare up to 4 demolition professionals in Kildare. Free, no obligation.
Kildare is Ireland's fastest-growing commuter county, with massive residential development from the mid-1990s onward. Towns like Naas, Celbridge, Maynooth, Leixlip, Newbridge, and Kilcock have extensive estates of 1990s-2010s semi-detached and detached houses. Many of these homes are now 15 to 25 years old and reaching the point where boilers, windows, and insulation need attention. Older towns (Athy, Kildare, Monasterevin) have pre-1970s housing requiring more full upgrades. The Curragh area has military housing with specific characteristics. Rural Kildare has flat, fertile farmland with scattered one-off houses.
Kildare is one of Ireland's drier and sunnier counties, with rainfall of approximately 750 to 850mm annually. The flat terrain provides consistent solar exposure, making it excellent for solar PV installations. The inland location means colder winters than coastal counties, with more frost days, which affects external render, paving, and plumbing (frozen pipe risk). The flat landscape means less wind exposure than western counties but also less natural shelter for individual properties.
Demolition in Kildare: Local Insights
Kildare is Ireland's fastest-growing commuter county, with massive residential development from the mid-1990s onward. Towns like Naas, Celbridge, Maynooth, Leixlip, Newbridge, and Kilcock have extensive estates of 1990s-2010s semi-detached and detached houses. Many of these homes are now 15 to 25 years old and reaching the point where boilers, windows, and insulation need attention. Older towns (Athy, Kildare, Monasterevin) have pre-1970s housing requiring more full upgrades. The Curragh area has military housing with specific characteristics. Rural Kildare has flat, fertile farmland with scattered one-off houses.
Kildare is one of Ireland's drier and sunnier counties, with rainfall of approximately 750 to 850mm annually. The flat terrain provides consistent solar exposure, making it excellent for solar PV installations. The inland location means colder winters than coastal counties, with more frost days, which affects external render, paving, and plumbing (frozen pipe risk). The flat landscape means less wind exposure than western counties but also less natural shelter for individual properties.
Kildare's commuter-driven property market means strong home values and significant demand for home improvements. The concentration of relatively modern housing (1990s-2010s) creates a specific market for mid-life upgrades: boiler replacement, window upgrades, kitchen and bathroom renovations, attic conversions, and energy retrofits. Kildare County Council manages planning and has been supportive of energy upgrade programmes. The M7 and M4 motorway corridors concentrate development along specific routes. Contractor competition is healthy with many Dublin-based trades serving the county.
Demolition Costs in Kildare
Typical costs for demolition in Kildare (prices may vary (typically 10% above national average)):
| Service | Typical Cost | Notes |
|---|---|---|
| Internal wall removal (load-bearing) | €2,200 | €5,500 | Structural requirements, size |
| Garage demolition | €2,200 | €4,400 | Size, access, waste disposal |
| Full house demolition | €16,500 | €38,500 | Size, location, asbestos |
Demolition costs vary hugely by scope. Internal wall removal depends on whether the wall is load-bearing (requiring steel beam installation) or partition (relatively simple removal). Full house demolition costs depend on the building size, construction type (a block house is harder to demolish than a timber frame), asbestos presence, access for machinery, and waste disposal requirements. Skip hire costs for demolition waste run €300 to €600 per skip. Asbestos removal, if needed, adds €2,000 to €10,000 depending on the extent. Dublin demolition rates are 15-20% above rural areas due to restricted access, traffic management, and higher waste disposal costs.
Areas We Cover in Kildare
Demolition FAQs for Kildare
Internal wall removal costs €800 to €2,000 for a non-load-bearing wall and €2,000 to €5,000 for a load-bearing wall (including structural steel beam and making good). Garage demolition costs €2,000 to €4,000. Full house demolition costs €15,000 to €35,000 depending on size, construction type, access, and waste disposal. Asbestos removal, if needed, adds €2,000 to €10,000 depending on extent.
Demolition of a habitable house generally requires planning permission from your local authority. Demolition of non-habitable structures (derelict buildings, sheds, garages) may be exempt, but check with your local authority. Internal demolition (removing walls within your home) does not require planning permission. If your property is a protected structure, any demolition, even internal, may require planning.
You cannot reliably determine this yourself. A structural engineer must assess the wall by examining its position in relation to the floor and roof structure above. Load-bearing walls typically run perpendicular to the floor joists and support the weight of the floors and roof above. However, there are exceptions, and getting it wrong can cause structural collapse. A structural engineer's assessment costs €200 to €500 and is essential for any wall removal.
Homes built before the mid-1990s in Ireland may contain asbestos in various materials: cement roof slates, floor tiles, soffit boards, pipe lagging, water tank insulation, and textured ceiling coatings (Artex). Asbestos is not dangerous if undisturbed, but demolition disturbs it, releasing fibres that cause serious lung disease. A licensed asbestos surveyor can test suspected materials. If asbestos is confirmed, a licensed removal contractor must handle it before demolition proceeds. The HSA maintains a register of licensed contractors.
Internal wall removal takes 1 to 3 days depending on the wall size and whether structural steel is needed. Garage demolition takes 1 to 2 days. Full house demolition takes 3 to 7 days for the demolition itself, plus time for site clearance and waste removal. Asbestos removal adds 1 to 5 days depending on the extent. Allow additional time for structural engineer assessments, asbestos surveys, and any required planning permission.
Demolition waste must be segregated into categories: concrete and masonry (can be crushed and reused), timber, metals (typically recycled), and general waste. All waste must be disposed of at licensed waste facilities. Your contractor should provide waste transfer documentation proving lawful disposal. Illegal dumping of demolition waste carries significant fines. A reputable contractor includes proper waste management in their service.