Electrician in Glasnevin, Dublin
Compare electrician professionals in Glasnevin. Free quotes, no obligation.
Glasnevin has a distinctive mix of 1930s-50s semi-detached houses (many with original features including Art Deco elements), Victorian red-brick terraces near the Botanic Gardens, and modern development near DCU. The Iona Road and Botanic Road areas have larger period properties. Housing estates from the 1960s-70s around Griffith Avenue extension and the Ballymun Road area provide more affordable stock. The proximity to the Botanic Gardens gives many properties mature garden settings.
Managed by Dublin City Council. A well-established northside suburb with property values of €400k to €800k. The 1930s-50s housing stock is a distinctive feature, with many homes now requiring full upgrades (insulation, windows, heating) while owners seek to preserve the original character. The area has a strong community identity and good local amenities. Conservation considerations apply near the Botanic Gardens.
Electrician in Glasnevin: Local Insights
Glasnevin has a distinctive mix of 1930s-50s semi-detached houses (many with original features including Art Deco elements), Victorian red-brick terraces near the Botanic Gardens, and modern development near DCU. The Iona Road and Botanic Road areas have larger period properties. Housing estates from the 1960s-70s around Griffith Avenue extension and the Ballymun Road area provide more affordable stock. The proximity to the Botanic Gardens gives many properties mature garden settings.
Managed by Dublin City Council. A well-established northside suburb with property values of €400k to €800k. The 1930s-50s housing stock is a distinctive feature, with many homes now requiring full upgrades (insulation, windows, heating) while owners seek to preserve the original character. The area has a strong community identity and good local amenities. Conservation considerations apply near the Botanic Gardens.
Electrician Costs in Glasnevin
Typical costs for electrician in the Glasnevin area (Dublin pricing applies):
| Service | Typical Cost | Notes |
|---|---|---|
| Fuse board upgrade | €600 | €1,200 | Existing wiring condition |
| Full house rewire (3-bed) | €5,250 | €9,000 | Property size, access |
| Additional sockets (per socket) | €120 | €225 | Location, cable run |
Dublin area estimates, 2026. Request quotes for accurate pricing.
Electrician FAQs
Electrician hourly rates are €45 to €75. Adding a double socket costs €80 to €150, installing a light fitting €60 to €120, a consumer unit upgrade €600 to €1,200, and a full house rewire for a 3-bed semi €4,000 to €8,000. Outdoor lighting installation costs €300 to €800. EV charger installation costs €250 to €600 for labour. Prices include labour and basic materials. Dublin rates are 15-20% higher than the national average.
Yes. Under Irish law, all electrical work must be carried out by a Registered Electrical Contractor listed on the Safe Electric register. This applies to domestic and commercial work alike. The electrician issues a Safe Electric completion certificate confirming the work meets national wiring standards (ET101). Unregistered work is illegal, potentially dangerous, not covered by home insurance, and creates problems when you come to sell.
Warning signs include frequent tripping of fuses or circuit breakers, flickering lights, a burning smell from sockets, discoloured or warm socket plates, old round-pin sockets, rewirable fuses with visible wire instead of modern MCBs, and a consumer unit without RCD protection. If your house was built before 1980 and has not been rewired, an electrical inspection by a registered electrician is strongly recommended to assess safety.
A full rewire of a three-bed semi takes 5 to 7 working days for the first fix (running cables through walls and ceilings) and 1 to 2 days for second fix (fitting sockets, switches, and lights) after plastering is complete. You can live in the house during the rewire, though there will be disruption and periods without power to individual circuits as the electrician works circuit by circuit.
A consumer unit upgrade replaces your old fuse board with a modern unit containing MCBs (miniature circuit breakers) and RCDs (residual current devices). MCBs trip instantly when a circuit overloads, replacing the old fuse wire that melts. RCDs detect earth faults and cut power in milliseconds, potentially saving your life if you touch a live wire. The upgrade costs €600 to €1,200 and is the single most impactful safety upgrade for any older home.
Minor tasks like changing a light bulb, replacing a fuse, or wiring a plug are fine for anyone. Anything beyond that, including adding sockets, running new circuits, changing light fittings, or any work in the consumer unit, must be done by a registered electrician. DIY electrical work is illegal for notifiable work, voids your home insurance, creates fire and electric shock risks, and will be flagged by electricians and inspectors when you sell.