Fencing in Kildare
Compare up to 4 fencing professionals in Kildare. Free, no obligation.
Kildare is Ireland's fastest-growing commuter county, with massive residential development from the mid-1990s onward. Towns like Naas, Celbridge, Maynooth, Leixlip, Newbridge, and Kilcock have extensive estates of 1990s-2010s semi-detached and detached houses. Many of these homes are now 15 to 25 years old and reaching the point where boilers, windows, and insulation need attention. Older towns (Athy, Kildare, Monasterevin) have pre-1970s housing requiring more full upgrades. The Curragh area has military housing with specific characteristics. Rural Kildare has flat, fertile farmland with scattered one-off houses.
Kildare is one of Ireland's drier and sunnier counties, with rainfall of approximately 750 to 850mm annually. The flat terrain provides consistent solar exposure, making it excellent for solar PV installations. The inland location means colder winters than coastal counties, with more frost days, which affects external render, paving, and plumbing (frozen pipe risk). The flat landscape means less wind exposure than western counties but also less natural shelter for individual properties.
Fencing in Kildare: Local Insights
Kildare is Ireland's fastest-growing commuter county, with massive residential development from the mid-1990s onward. Towns like Naas, Celbridge, Maynooth, Leixlip, Newbridge, and Kilcock have extensive estates of 1990s-2010s semi-detached and detached houses. Many of these homes are now 15 to 25 years old and reaching the point where boilers, windows, and insulation need attention. Older towns (Athy, Kildare, Monasterevin) have pre-1970s housing requiring more full upgrades. The Curragh area has military housing with specific characteristics. Rural Kildare has flat, fertile farmland with scattered one-off houses.
Kildare is one of Ireland's drier and sunnier counties, with rainfall of approximately 750 to 850mm annually. The flat terrain provides consistent solar exposure, making it excellent for solar PV installations. The inland location means colder winters than coastal counties, with more frost days, which affects external render, paving, and plumbing (frozen pipe risk). The flat landscape means less wind exposure than western counties but also less natural shelter for individual properties.
Kildare's commuter-driven property market means strong home values and significant demand for home improvements. The concentration of relatively modern housing (1990s-2010s) creates a specific market for mid-life upgrades: boiler replacement, window upgrades, kitchen and bathroom renovations, attic conversions, and energy retrofits. Kildare County Council manages planning and has been supportive of energy upgrade programmes. The M7 and M4 motorway corridors concentrate development along specific routes. Contractor competition is healthy with many Dublin-based trades serving the county.
Fencing Costs in Kildare
Typical costs for fencing in Kildare (prices may vary (typically 10% above national average)):
| Service | Typical Cost | Notes |
|---|---|---|
| Panel fencing (per metre) | €44 | €77 | Height, material, ground conditions |
| Post and rail (per metre) | €28 | €50 | Material, height |
| Garden gate | €220 | €660 | Style, material, hardware |
Fencing costs per linear metre include posts, panels or boards, and installation. Timber panel fencing is the most affordable. Concrete post-and-panel systems cost more upfront but last significantly longer. Ground conditions matter: rocky ground requires specialist post installation, and sloping sites need stepped panels (more cutting and fitting). Removal of old fencing and vegetation adds to the cost. Dublin rates are 15-20% above the national average.
Areas We Cover in Kildare
Fencing FAQs for Kildare
Standard timber panel fencing costs €40 to €65 per linear metre installed. Close-board (featherboard) fencing costs €55 to €85/m. Concrete post-and-panel costs €50 to €80/m. Decorative metal railings cost €80 to €150/m. A typical back garden (30 to 40 linear metres) costs €1,200 to €3,000. Prices include posts, panels, concrete, and fitting but may exclude old fence removal.
Fences up to 2 metres high to the rear and side of a property are generally exempt from planning permission. Front garden fences are limited to 1.2 metres. Fences in conservation areas or on protected structures may have additional restrictions. If your fence is on a corner site or near a road junction, sight-line requirements may limit height.
Dip-treated timber panels last 8 to 12 years. Pressure-treated panels last 15 to 20 years. Concrete posts last 30+ years. The weakest point is always where timber meets damp ground. Concrete gravel boards at the base and concrete posts eliminate the two most common rot points, significantly extending the fence's life.
An experienced two-person team typically installs 10 to 15 linear metres of panel fencing per day. A standard back garden (30 to 40 metres) takes 2 to 3 days. More complex jobs (close-board, slopes, concrete panels) take longer. Allow time for concrete to set around posts (24-48 hours) before heavy wind loading.
In Ireland, there is no automatic legal obligation to fence your boundary. Responsibility depends on the title deeds of each property, which may specify who maintains which boundary. In practice, it is common to share the cost with your neighbour by agreement, but this is not legally required. Check your title deeds and discuss with your neighbour before replacing a shared fence.
Concrete post-and-panel is the most weather-resistant option for Irish conditions. For timber, pressure-treated close-board fencing on concrete posts with concrete gravel boards is the best combination: the concrete components never rot, and the pressure-treated timber resists the damp for 15 to 20 years. Avoid lightweight larch-lap panels in exposed locations, as they are easily damaged by wind.