Plastering & Rendering in Roscommon
Compare up to 4 plastering & rendering professionals in Roscommon. Free, no obligation.
Roscommon is a rural midlands-west county with Roscommon Town, Boyle, and Castlerea as the main centres. Housing is predominantly rural farmhouses, small-town housing from various eras, and self-builds. The Shannon border creates lakeside properties with specific considerations. Limited modern estate development compared to commuter counties.
Moderate to high rainfall (1,000-1,200mm), increasing westward. Cold winters typical of the midlands. The Shannon floodplain affects low-lying properties. Rolling to flat terrain with good solar exposure.
Plastering & Rendering in Roscommon: Local Insights
Roscommon is a rural midlands-west county with Roscommon Town, Boyle, and Castlerea as the main centres. Housing is predominantly rural farmhouses, small-town housing from various eras, and self-builds. The Shannon border creates lakeside properties with specific considerations. Limited modern estate development compared to commuter counties.
Moderate to high rainfall (1,000-1,200mm), increasing westward. Cold winters typical of the midlands. The Shannon floodplain affects low-lying properties. Rolling to flat terrain with good solar exposure.
A quiet, affordable property market. Lower demand for home services but strong value for money. Limited local contractor pool; Galway, Athlone, and Sligo-based trades serve parts of the county.
Plastering & Rendering Costs in Roscommon
Typical costs for plastering & rendering in Roscommon (prices may vary ):
| Service | Typical Cost | Notes |
|---|---|---|
| Skim coat (per room) | €270 | €540 | Room size, condition of walls |
| Full house re-plaster (3-bed) | €2,700 | €5,400 | Number of rooms, wall condition |
| External render | €4,500 | €10,800 | House size, render system |
Internal plastering costs depend on whether you need skimming only (faster, cheaper) or full re-plaster (removing old plaster, re-lathing, scratch coat, and skim). Room size, ceiling height, and the condition of the underlying surface all affect pricing. External rendering costs depend on the render system (traditional sand-and-cement, one-coat, silicone), the surface area, and scaffolding requirements. Scaffolding adds €1,500 to €3,000 for a typical house. Dublin plasterers charge 15-20% more than the national average.
Areas We Cover in Roscommon
Plastering & Rendering FAQs for Roscommon
Skimming a single room (walls and ceiling) costs €300 to €600 depending on room size. A full house re-skim for a three-bed semi costs €2,500 to €5,000. Full re-plastering (back to block) costs roughly double. External rendering costs €40 to €70 per square metre for traditional render, €50 to €90 for silicone or one-coat systems. A full house external render (three-bed semi) costs €6,000 to €12,000 including scaffolding.
Skimming one room takes a day. A full house re-skim takes 4 to 7 days. Full re-plastering (including removal of old plaster) takes 7 to 14 days for a three-bed semi. External rendering takes 1 to 3 weeks depending on the house size and system used. Drying time of 2 to 4 weeks after completion is needed before painting.
New plaster typically takes 2 to 4 weeks to dry fully, depending on room ventilation, temperature, and humidity. You can tell plaster is dry when it changes from a dark colour to a uniformly light pink or white. Do not attempt to speed up drying with direct heat (radiators against the wall, heaters aimed at the plaster) as this causes cracking. Good ventilation (windows cracked open) is the safest approach.
Skimming applies a thin (2-3mm) coat of finishing plaster over an existing sound surface (plasterboard, old plaster). It creates a smooth finish ready for painting. Re-plastering involves removing the old plaster back to the blockwork, applying a new scratch coat (8-12mm), and then skimming. Re-plastering is necessary when old plaster is blowing (detaching from the wall), extensively cracked, or damp-damaged.
Hairline cracks in plaster are common and usually caused by natural building settlement, temperature fluctuations, or slight movement in the structure. They are cosmetic and easily filled. Larger cracks or cracks that reappear after filling may indicate structural movement, which should be assessed by an engineer. Cracking in new plaster usually means it dried too quickly (heated too fast) or was applied too thickly in one coat.
If walls are in poor condition (cracks, bumps, blown plaster, damp staining), replastering makes a noticeable difference to how buyers perceive the property. A freshly plastered and painted house feels clean, well-maintained, and move-in ready. A full re-skim of a three-bed semi costs €2,500 to €5,000, which is a modest investment relative to the improvement in first impressions.