Underfloor Heating in Tallaght, Dublin
Compare underfloor heating professionals in Tallaght. Free quotes, no obligation.
Tallaght is Dublin's largest suburb with a diverse housing stock reflecting decades of development. Older estates from the 1970s-80s (Killinarden, Jobstown, Fettercairn, Springfield, Tymon) have three-bed semi-detached houses, many with solid walls and single-glazed windows still in need of upgrading. Newer estates in Citywest, Saggart, and Fortunestown have 1990s-2000s housing. The Square shopping centre area has modern apartment development. TUD (formerly IT Tallaght) drives student and professional rental demand. The range from older social housing to premium Citywest homes creates a very diverse market.
Managed by South Dublin County Council. Tallaght has benefited significantly from the Luas Red Line, driving property values and investment. The older housing estates represent one of Dublin's largest concentrations of homes needing energy retrofit: insulation, windows, heating system upgrades. South Dublin County Council has been proactive in supporting energy upgrade schemes. Property values range widely from €250k to €500k depending on the specific area. The volume of housing creates strong demand for all home services at competitive prices.
Underfloor Heating in Tallaght: Local Insights
Tallaght is Dublin's largest suburb with a diverse housing stock reflecting decades of development. Older estates from the 1970s-80s (Killinarden, Jobstown, Fettercairn, Springfield, Tymon) have three-bed semi-detached houses, many with solid walls and single-glazed windows still in need of upgrading. Newer estates in Citywest, Saggart, and Fortunestown have 1990s-2000s housing. The Square shopping centre area has modern apartment development. TUD (formerly IT Tallaght) drives student and professional rental demand. The range from older social housing to premium Citywest homes creates a very diverse market.
Managed by South Dublin County Council. Tallaght has benefited significantly from the Luas Red Line, driving property values and investment. The older housing estates represent one of Dublin's largest concentrations of homes needing energy retrofit: insulation, windows, heating system upgrades. South Dublin County Council has been proactive in supporting energy upgrade schemes. Property values range widely from €250k to €500k depending on the specific area. The volume of housing creates strong demand for all home services at competitive prices.
Underfloor Heating Costs in Tallaght
Typical costs for underfloor heating in the Tallaght area (Dublin pricing applies):
| Service | Typical Cost | Notes |
|---|---|---|
| Electric UFH (per sq m) | €75 | €120 | Area, thermostat |
| Wet UFH (per sq m) | €120 | €195 | System design, manifold |
| Wet UFH full house (new build) | €7,500 | €15,000 | Property size, zones |
Dublin area estimates, 2026. Request quotes for accurate pricing.
Underfloor Heating FAQs
Wet underfloor heating in a new build or extension costs €40 to €70 per square metre for supply and installation, where the screed is being poured anyway. Retrofit wet systems cost €60 to €100 per sq m due to additional floor preparation. Electric mat systems cost €30 to €60 per sq m. A bathroom electric mat costs €500 to €1,200 installed. A whole-house wet system in a 150 sq m new build costs €7,000 to €12,000 including manifold, pipes, and controls.
Yes, particularly when paired with a heat pump. Underfloor heating operates at water temperatures of 30 to 40 degrees, which matches the output of heat pumps perfectly, allowing both systems to run at peak efficiency. This combination is one of the most energy-efficient heating solutions available in Ireland today. Even with a conventional boiler, underfloor heating distributes warmth more evenly than radiators, which often means you can run the thermostat 1 to 2 degrees lower for the same perceived comfort.
It is possible but more complex and expensive than in a new build. Options include laying a low-profile wet system on top of the existing floor (raising the floor level by 30 to 50mm), excavating the existing floor to accommodate standard pipes beneath a new screed, or installing electric mats in individual rooms like bathrooms and kitchens. The practicality depends on your existing floor construction, ceiling height in the room below, and your willingness to accept a slightly raised floor level.
Tile (porcelain, ceramic, natural stone) is the best conductor of heat and the ideal partner. LVT and engineered wood are also fully compatible, with engineered wood performing best at thicknesses up to 18mm. Thick carpet with dense underlay (above 1.5 tog combined) insulates against the heat and significantly reduces the system's effectiveness. Solid hardwood is generally not recommended due to the risk of shrinkage, warping, and gaps developing over time from the constant heat below.
Underfloor heating is a slow-response system compared to radiators. A wet system embedded in screed takes 2 to 4 hours to bring a cold room up to temperature. Once the screed is warm, its thermal mass maintains a stable temperature with minimal additional energy. Electric mat systems beneath tiles respond faster, typically 30 to 60 minutes. The key is to programme the system with longer lead times rather than switching it on and off throughout the day.
Yes, this is very common in Irish homes. Many use underfloor heating in the ground floor extension or kitchen-living area and radiators upstairs. Both can run from the same boiler or heat pump, but the system must be designed with separate flow temperatures because underfloor heating runs cooler (30-40 degrees) than radiators (55-70 degrees). A mixing valve or buffer tank manages these different temperature requirements within one system.