Underfloor Heating in Kildare
Compare up to 4 underfloor heating professionals in Kildare. Free, no obligation.
Kildare is Ireland's fastest-growing commuter county, with massive residential development from the mid-1990s onward. Towns like Naas, Celbridge, Maynooth, Leixlip, Newbridge, and Kilcock have extensive estates of 1990s-2010s semi-detached and detached houses. Many of these homes are now 15 to 25 years old and reaching the point where boilers, windows, and insulation need attention. Older towns (Athy, Kildare, Monasterevin) have pre-1970s housing requiring more full upgrades. The Curragh area has military housing with specific characteristics. Rural Kildare has flat, fertile farmland with scattered one-off houses.
Kildare is one of Ireland's drier and sunnier counties, with rainfall of approximately 750 to 850mm annually. The flat terrain provides consistent solar exposure, making it excellent for solar PV installations. The inland location means colder winters than coastal counties, with more frost days, which affects external render, paving, and plumbing (frozen pipe risk). The flat landscape means less wind exposure than western counties but also less natural shelter for individual properties.
Underfloor Heating in Kildare: Local Insights
Kildare is Ireland's fastest-growing commuter county, with massive residential development from the mid-1990s onward. Towns like Naas, Celbridge, Maynooth, Leixlip, Newbridge, and Kilcock have extensive estates of 1990s-2010s semi-detached and detached houses. Many of these homes are now 15 to 25 years old and reaching the point where boilers, windows, and insulation need attention. Older towns (Athy, Kildare, Monasterevin) have pre-1970s housing requiring more full upgrades. The Curragh area has military housing with specific characteristics. Rural Kildare has flat, fertile farmland with scattered one-off houses.
Kildare is one of Ireland's drier and sunnier counties, with rainfall of approximately 750 to 850mm annually. The flat terrain provides consistent solar exposure, making it excellent for solar PV installations. The inland location means colder winters than coastal counties, with more frost days, which affects external render, paving, and plumbing (frozen pipe risk). The flat landscape means less wind exposure than western counties but also less natural shelter for individual properties.
Kildare's commuter-driven property market means strong home values and significant demand for home improvements. The concentration of relatively modern housing (1990s-2010s) creates a specific market for mid-life upgrades: boiler replacement, window upgrades, kitchen and bathroom renovations, attic conversions, and energy retrofits. Kildare County Council manages planning and has been supportive of energy upgrade programmes. The M7 and M4 motorway corridors concentrate development along specific routes. Contractor competition is healthy with many Dublin-based trades serving the county.
Underfloor Heating Costs in Kildare
Typical costs for underfloor heating in Kildare (prices may vary (typically 10% above national average)):
| Service | Typical Cost | Notes |
|---|---|---|
| Electric UFH (per sq m) | €55 | €88 | Area, thermostat |
| Wet UFH (per sq m) | €88 | €143 | System design, manifold |
| Wet UFH full house (new build) | €5,500 | €11,000 | Property size, zones |
Wet: €40-€70/m2 new build, €60-€100/m2 retrofit. Electric: €30-€60/m2. Bathroom mat €500-€1,200. Whole-house wet (150m2) €7,000-€12,000. Insulation beneath heating is critical.
Areas We Cover in Kildare
Underfloor Heating FAQs for Kildare
Wet underfloor heating in a new build or extension costs €40 to €70 per square metre for supply and installation, where the screed is being poured anyway. Retrofit wet systems cost €60 to €100 per sq m due to additional floor preparation. Electric mat systems cost €30 to €60 per sq m. A bathroom electric mat costs €500 to €1,200 installed. A whole-house wet system in a 150 sq m new build costs €7,000 to €12,000 including manifold, pipes, and controls.
Yes, particularly when paired with a heat pump. Underfloor heating operates at water temperatures of 30 to 40 degrees, which matches the output of heat pumps perfectly, allowing both systems to run at peak efficiency. This combination is one of the most energy-efficient heating solutions available in Ireland today. Even with a conventional boiler, underfloor heating distributes warmth more evenly than radiators, which often means you can run the thermostat 1 to 2 degrees lower for the same perceived comfort.
It is possible but more complex and expensive than in a new build. Options include laying a low-profile wet system on top of the existing floor (raising the floor level by 30 to 50mm), excavating the existing floor to accommodate standard pipes beneath a new screed, or installing electric mats in individual rooms like bathrooms and kitchens. The practicality depends on your existing floor construction, ceiling height in the room below, and your willingness to accept a slightly raised floor level.
Tile (porcelain, ceramic, natural stone) is the best conductor of heat and the ideal partner. LVT and engineered wood are also fully compatible, with engineered wood performing best at thicknesses up to 18mm. Thick carpet with dense underlay (above 1.5 tog combined) insulates against the heat and significantly reduces the system's effectiveness. Solid hardwood is generally not recommended due to the risk of shrinkage, warping, and gaps developing over time from the constant heat below.
Underfloor heating is a slow-response system compared to radiators. A wet system embedded in screed takes 2 to 4 hours to bring a cold room up to temperature. Once the screed is warm, its thermal mass maintains a stable temperature with minimal additional energy. Electric mat systems beneath tiles respond faster, typically 30 to 60 minutes. The key is to programme the system with longer lead times rather than switching it on and off throughout the day.
Yes, this is very common in Irish homes. Many use underfloor heating in the ground floor extension or kitchen-living area and radiators upstairs. Both can run from the same boiler or heat pump, but the system must be designed with separate flow temperatures because underfloor heating runs cooler (30-40 degrees) than radiators (55-70 degrees). A mixing valve or buffer tank manages these different temperature requirements within one system.