Underfloor Heating in Wexford
Compare up to 4 underfloor heating professionals in Wexford. Free, no obligation.
Wexford has a strong mix of coastal town properties (Wexford Town, Gorey, Enniscorthy, New Ross) and rural farmhouses. Gorey has become a Dublin commuter town with extensive modern estates. Wexford Town has older housing stock including Georgian town centre properties. Rosslare and Courtown have holiday home stock. The agricultural heartland has traditional farmhouses requiring modernisation.
The sunny south-east lives up to its reputation, with Wexford receiving among the highest sunshine hours in Ireland and relatively low rainfall (800-900mm). This makes solar PV particularly effective. The south-east coast faces moderate sea exposure. Inland areas have fertile, well-drained soil. Milder winters than midland counties.
Underfloor Heating in Wexford: Local Insights
Wexford has a strong mix of coastal town properties (Wexford Town, Gorey, Enniscorthy, New Ross) and rural farmhouses. Gorey has become a Dublin commuter town with extensive modern estates. Wexford Town has older housing stock including Georgian town centre properties. Rosslare and Courtown have holiday home stock. The agricultural heartland has traditional farmhouses requiring modernisation.
The sunny south-east lives up to its reputation, with Wexford receiving among the highest sunshine hours in Ireland and relatively low rainfall (800-900mm). This makes solar PV particularly effective. The south-east coast faces moderate sea exposure. Inland areas have fertile, well-drained soil. Milder winters than midland counties.
Gorey's growth as a commuter town drives demand for modern home services. Wexford Town and Enniscorthy have heritage properties with conservation considerations. Strong agricultural economy supports rural home improvements. Contractor availability is moderate with some Dublin-based trades serving north Wexford.
Underfloor Heating Costs in Wexford
Typical costs for underfloor heating in Wexford (prices may vary ):
| Service | Typical Cost | Notes |
|---|---|---|
| Electric UFH (per sq m) | €50 | €80 | Area, thermostat |
| Wet UFH (per sq m) | €80 | €130 | System design, manifold |
| Wet UFH full house (new build) | €5,000 | €10,000 | Property size, zones |
Wet: €40-€70/m2 new build, €60-€100/m2 retrofit. Electric: €30-€60/m2. Bathroom mat €500-€1,200. Whole-house wet (150m2) €7,000-€12,000. Insulation beneath heating is critical.
Areas We Cover in Wexford
Underfloor Heating FAQs for Wexford
Wet underfloor heating in a new build or extension costs €40 to €70 per square metre for supply and installation, where the screed is being poured anyway. Retrofit wet systems cost €60 to €100 per sq m due to additional floor preparation. Electric mat systems cost €30 to €60 per sq m. A bathroom electric mat costs €500 to €1,200 installed. A whole-house wet system in a 150 sq m new build costs €7,000 to €12,000 including manifold, pipes, and controls.
Yes, particularly when paired with a heat pump. Underfloor heating operates at water temperatures of 30 to 40 degrees, which matches the output of heat pumps perfectly, allowing both systems to run at peak efficiency. This combination is one of the most energy-efficient heating solutions available in Ireland today. Even with a conventional boiler, underfloor heating distributes warmth more evenly than radiators, which often means you can run the thermostat 1 to 2 degrees lower for the same perceived comfort.
It is possible but more complex and expensive than in a new build. Options include laying a low-profile wet system on top of the existing floor (raising the floor level by 30 to 50mm), excavating the existing floor to accommodate standard pipes beneath a new screed, or installing electric mats in individual rooms like bathrooms and kitchens. The practicality depends on your existing floor construction, ceiling height in the room below, and your willingness to accept a slightly raised floor level.
Tile (porcelain, ceramic, natural stone) is the best conductor of heat and the ideal partner. LVT and engineered wood are also fully compatible, with engineered wood performing best at thicknesses up to 18mm. Thick carpet with dense underlay (above 1.5 tog combined) insulates against the heat and significantly reduces the system's effectiveness. Solid hardwood is generally not recommended due to the risk of shrinkage, warping, and gaps developing over time from the constant heat below.
Underfloor heating is a slow-response system compared to radiators. A wet system embedded in screed takes 2 to 4 hours to bring a cold room up to temperature. Once the screed is warm, its thermal mass maintains a stable temperature with minimal additional energy. Electric mat systems beneath tiles respond faster, typically 30 to 60 minutes. The key is to programme the system with longer lead times rather than switching it on and off throughout the day.
Yes, this is very common in Irish homes. Many use underfloor heating in the ground floor extension or kitchen-living area and radiators upstairs. Both can run from the same boiler or heat pump, but the system must be designed with separate flow temperatures because underfloor heating runs cooler (30-40 degrees) than radiators (55-70 degrees). A mixing valve or buffer tank manages these different temperature requirements within one system.